danthe pisze:
kostuch pisze:
Wystarczy wypruć elektronikę pozbawioną jakichkolwiek elementów przeciwzakłóceniowych (bo to obniża cenę o 5 centów) i zasilać goły led własnym zasilaczem.
Lub jak inni - albo rozmawiasz przez radio, albo widzisz. Po co się rozpraszać...
A tak przy okazji to możesz wskazać jakiś dobry "niesiejący" układ zasilający do samochodu?
Na początek 4A 5V. Testowałem już różne. Jak na razie żaden "przetwornicowy" nie zdał egzaminu. Stabilizatorowy owszem, tylko pojawia się problem z odprowadzeniem ciepła przy tej mocy.
Liniowy stabilizator przy 4A może już służyć jako nagrzewnica
Impulsowy może być praktycznie dowolny, np. LM2678
Ważne żeby przeczytać (i zastosować) wskazówki podane w datasheet odnośnie topologii płytki i parametrów elementów zewnętrznych (zwłaszcza cewki i kondensatorów).
Chińczyk nie zastosuje np kondensatorów LowESR, bo za drogie.
Czyli żeby było dobrze, trzeba zrobić samemu.
np.
The inductors offered have been specifically manufactured to provide proper operation under all operating
conditions of input and output voltage and load current. Several part types are offered for a given amount of
inductance. Both surface mount and through-hole devices are available. The inductors from each of the three
manufacturers have unique characteristics.
Renco: ferrite stick core inductors; benefits are typically lowest cost and can withstand ripple and transient peak
currents above the rated value. These inductors have an external magnetic field, which may generate EMI.
Pulse Engineering: powdered iron toroid core inductors; these also can withstand higher than rated currents and,
being toroid inductors, will have low EMI.
Coilcraft: ferrite drum core inductors; these are the smallest physical size inductors and are available only as
surface mount components. These inductors also generate EMI but less than stick inductors.